Things to pay special attention to when using the fully automatic rivet air press

1. When the indicator light of the rivet air compressor is flashing, it is strictly prohibited to make any adjustments to the equipment to prevent unnecessary damage to the operator caused by the equipment being operated outside the unit.

2. During the raw material production and processing operation of the automatic riveting machine, personnel need to have a certain distance from the rivet press and should not be too close, otherwise it may cause debris to splash out and cause injuries to the personnel.

The fully automatic rivet air press is an automatic sewing machine that completes a specific feeding process according to the prescribed stitches. Different types of fully automatic riveting machines and different types of buttons have different stitches. The common four-eye flat button has four stitches. There are two types of stitches for automatic rivet air presses: single-line railway chain stitch (No. 107 stitch) and lock stitch (No. 304 stitch). Many widely used automatic rivet air presses use single-line railway chain stitch. Stitches.

Automatic rivet pneumatic presses are generally used in places where small rivets and high production processing output are required. In the riveting process of small rivets, the installation process of small rivets usually takes up a lot of auxiliary time, which not only increases the labor efficiency and time of workers, but also the output power is very low. The fully automatic feeding rivet pneumatic press uses equipment to select rivets, and uses slide rails to send the rivets to the production and processing area. The entire process is completed automatically. The server adopts the overall design of pneumatic or hydraulic press and is equipped with a new relatively stable riveting structure in the world. The riveting function is complete, the process is smooth and shake-free, and the surface of the parts after riveting is smooth and beautiful. Naturally, the rotary CNC machine tool rivet air press can not only rivet rivets, but also rivet nuts and rivet studs in daily production processes can be fully automatically riveted on these two devices.

Operating steps of automatic rivet air press:

1. When the automatic rivet air compressor manufacturer introduces the closed power supply, everyone needs to pay attention. The automatic rivet air compressor has been cleaned according to the principle of from inside to outside and from top to bottom. To clean the storage tank of the rivet air compressor, take out the storage tank of the rivet air compressor and remove the remaining rivets to avoid the adverse effects of the remaining rivets being mixed with the riveted products during subsequent production. Clean them with cotton cloth and then put them back together.

2. Clean up the slide rail of the automatic rivet pneumatic press. Move the slide rail to block the remaining rivets in the guide rail into the chute of the clamp. Press down the sliding frame to remove the remaining rivets from the clamp. Use pure cotton to remove the remaining rivets. Use a cloth to clean the inside of the slide rail, the clamping mouth, and the lower mold rod. The manufacturer of the automatic rivet air compressor details that the rivet air compressor is driven by compressed air. The rivet air compressor works effectively and can reduce a large part of the hard work. The automatic rivet air compressor casing is manually controlled and the automated assembly line has an integrated structure. It's simple, easy to operate, very cheap, and has good functions. The fully automatic rivet pneumatic press does not produce noise due to the sleep of the hydraulic press mechanism and electronic components, can save power engineering costs and costs, and is very cost-effective.