From its name, we can tell what this product is used for. After continuous improvement, this product has more and more functions. In order to make more people familiar with it, Next, the editor will introduce to you some basic information about the gas-liquid supercharger? If you want to know, let's take a look. I hope it can help you.

A gas-liquid booster is a device that uses a gas-liquid booster cylinder as an output device. The types and functions of gas-liquid boosters are very rich and can replace mechanical presses, gas presses and traditional hydraulic presses. Gas-liquid boosters are widely used in stamping, bending, cutting, punching, embossing, riveting, sheet metal forming, fastening, extrusion, profile welding, material inspection, etc. Fast speed and stable output. The device is simple, easy to adjust and easy to maintain. It has large output and can achieve high oil pressure output. A simple source of energy. Movement noise is small. Heated oil pressure system without disturbance. When the working air pressure of the gas-liquid booster acts on the surface of the hydraulic oil (or piston), the hydraulic oil compresses the air and flows into the pre-compression stroke chamber. At this time, the hydraulic oil quickly pushes the cylinder. Then it stops running. At this time, the pressurizing chamber of the pressurizing cylinder begins to pressurize through electrical signals (or pneumatic signals) to achieve the purpose of product molding.

Before use, perform maintenance on the gas-liquid booster. Check whether the fuel tank, oil level, and oil circuit meet the specified standards. If not, refuel in time. Check that the buttons are flexible and not stuck. When using the gas-liquid booster, check whether the motor ground wire is loose, disconnected or damaged. If it is loose, tighten it. If it falls off or is damaged, notify maintenance personnel. Check whether the safety protection devices are complete and reliable. Check each handle for flexibility. Tighten any loose nuts.

The maintenance of the gas-liquid booster during use is to start the hydraulic pump and check whether the hydraulic pump is working normally and whether the seals and pipelines are blocked or leaking. Check whether the limit switch function is good and the bumper position is normal. When using a gas-liquid booster, pay attention to whether the temperature rise and sound of each moving part are normal. Maintenance after use of the gas-liquid booster is to inspect and clean all moving parts. Each joystick switch is set to the neutral zero position. Inspect, clean and organize work surfaces and work areas.

If you don’t understand, you can come to us first and click to enter the official website to see the basic information of the company. This company is strong, and it can be seen from the time they were established that they have experience, and their credibility and reputation are also very good. We have professional staff here to provide you with relevant professional knowledge. You are welcome to come for consultation and purchase.