Let’s talk about the problems often encountered in the use of automatic riveting machines.

Riveting technology began to appear in the 1970s. This rigid technology is a good substitute for bolting and welding technology. The automatic riveting machine was developed using this technology. It is relatively unfamiliar to friends who are new to this equipment. Use Many problems will arise during the process. Let’s take a look at the problems that everyone often encounters during use.

What is the principle of automatic riveting machine?

Because different punches are used, the mold will contact a point area of ​​the workpiece every time. The rivet can deform under a certain pressure. Then, the deformation area will expand to the entire section that needs to be deformed through swinging, so that a complete end face deformation can be formed. .

What issues need to be paid attention to during processing?

Generally, attention should be paid to the length and diameter and assembly form of the rivet during processing. If the length-to-diameter ratio of the rivet exceeds 10mm, and the rivet is assembled on the outside of the workpiece, that is to say, the rivet is not surrounded by metal, then the ordinary model will not be applicable. will cause the rivet to bend, instead requiring the use of a special type of equipment.

 

What is the processing efficiency of automatic riveting machine equipment? How long does it usually take to process a riveting point?

 

The processing efficiency of automatic riveting machine equipment is very high. The riveting time of a single riveting point is about 2 to 3 seconds. Especially for automatic models, the processing efficiency is greatly improved.

 

What are the main functions of automatic riveting machine equipment? In which industries are they mainly used?

 

The main function of this equipment is metal deformation, which is suitable for riveting various types of rivets, such as hollow rivets, semi-hollow rivets, etc. It is also suitable for flanging sealing of workpieces and permanent connection of workpieces.

 

At present, many industries are inseparable from this kind of equipment, such as precision machinery, textile equipment, steel furniture, construction hardware, stationery, luggage, auto parts, etc.

 

How long is the service life of the equipment?

 

If the quality of the equipment is up to standard, its normal service life is 8 to 10 years. If it can be properly maintained during service, the actual service life may be longer.

 

Which parts of the automatic riveting machine equipment are easily damaged?

 

Automatic riveting machine equipment consists of many parts, among which bearings, sealing rings and foot switches are easily damaged. This is because these parts need to be worn for a long time, so they will be damaged after a period of use.

 

Performance will only occur after the damage. After the bearing is damaged, there will often be obvious noises, which will then evolve into jamming. After the sealing ring is damaged, hydraulic equipment will leak oil, and pneumatic equipment will suffer from insufficient pressure and air leakage.

 

When it is confirmed that the parts of the automatic riveting machine are damaged, the spare parts should be replaced in time, or the replacement parts should be purchased and replaced strictly according to the specifications and models of the parts in the instruction manual.

 

Okay, that’s all for today. Thank you for watching. See you next time.