Everything has its own value. In our daily lives, there are many things and products that we cannot live without. So in the industrial field, there are many mechanical equipments that play their roles in different fields, and gas-liquid boosters are no exception. Today we will talk about the precautions for using gas-liquid boosters? If you are interested, please continue reading.

Since the booster cylinder of the gas-liquid booster is often running at high speed, it is easy to cause wear and tear on the machine, so the operation should be carried out according to the instruction manual. The operating temperature of the lifting cylinder is approx. -5℃～60℃, operating speed 50～1000mm/s. In order to ensure the normal operation of the booster cylinder of the gas-liquid booster, the following points should be paid attention to during use: Keep it clean before connecting the booster cylinder. To the air circuit , please clean away dust and other debris on the pipes and components. So as not to reduce the service life of the booster cylinder.

When used within the normal pressure range, the working pressure of the cylinder of the gas-liquid booster should operate within the working pressure range specified in the test report and shall not exceed the specified working pressure. Pay attention to the working environment of the booster cylinder. The temperature of the cylinder's working environment is fixed at the time of design. If the working environment needs to be changed due to work and the temperature exceeds this temperature, you need to contact the pressure cylinder technician. Since some parts of the cylinder are made of iron, please do not use it in environments with very harsh working conditions (such as environments exposed to chemicals). Please install effective air treatment components at the front end. Oil lubrication and oil drainage are performed when the cylinder (three-point combination) is connected.

It is not allowed to add other hydraulic oil without authorization during use of the gas-liquid booster. The quality of the hydraulic oil used in the construction of the lifting cylinder is VG68# anti-wear hydraulic oil. Other liquid media (such as engine oil, water, etc.) are not allowed to be used without authorization and are irrevocable.

Please be sure to follow the procedures when using the gas-liquid booster. The operation program should be carried out according to the operation program of the gas circuit assembly plan, that is, pre-pressure operation - boost operation, pressure release - pre-pressure reset. Pay attention to maintenance and frequently check the working condition of the booster cylinder of the gas-liquid booster. In order to avoid damage to the mold or workpiece caused by excessive cylinder pressure during pressurization, please install a pressure relief valve at the entrance of the pressurized section to effectively protect your product. In order to ensure the stability of the amplification cylinder, it is recommended to install the air reservoir in parallel between the third cylinder and the amplification cylinder as much as possible. When the booster cylinder is used more than 500,000 times or for more than half a year, it is recommended to replace all the hydraulic oil in the cylinder of the gas-liquid booster to increase the life and service life of the cylinder.

The main purpose of this is that if you have something you don’t understand, you can call us for consultation at any time. Once you enter the official website, you can see the contact information. You can also consult the online staff. We will help you solve some problems with quotation methods.